automatic blowing machine manufacturers tell you the solutions to common problems

Automatic blowing machine manufacturers will introduce to you: Automatic blowing machine blowing automatic operation, no manual operation, but the automatic blowing machine will inevitably break down, the editor combines the common problems of automatic blowing machine of market customers to share with you the automatic blowing machine The common faults and solutions of the blow molding machine are for your reference.

Bottom molding is not full:

Reasons: 1. The blowing pressure is not enough. 2. The temperature of the preform is slightly low during blowing.

Solution:

1. Check whether the high-pressure filter on the side of the mold is smooth, so as not to affect the high-pressure gas supply.

automatic blowing machine manufacturers

2. Check the working condition of the road valve to ensure the precise positioning of air blowing 1 and air blowing 2.

3. Check the airflow control elements of air blow 1 and air blow 2 to ensure the correct setting value and the inside is unblocked.

4. Make sure that all the ventilation holes on the mold are not blocked.

Neck bend:

Reasons: 1. Due to mechanical operation, excessive material build-up in the neck causes deformation after mold closing.

Solution:

1. Optimize the clamping structure.

2. The automatic blowing machine manufacturers tell you that the convex ring is clamped too tightly in the recess of the mold top plate, and the size of the preform must be fixed when it is still hot.

RELEVANT

23/02/10

Precautions for operation of semi automatic blow molding machine 4cavity products

What should be paid attention to when operating semi automatic blow molding machine 4cavity products? 1. Open the cooling water valve before heating the machine to start production, and observe whether the water channel is unobstructed.

VIEW ALL

22/07/29

The future of blow molding machines will be brighter

The sales volume of blow molding machines in recent years has been better than before. At present, my country's blow molding machine manufacturers have developed their own core systems for blow molding machines, while the high-end market is just the opposite. one part.

VIEW ALL

22/07/29

What are the factors affecting the process quality of the mineral water blow molding machine?

The factors that affect the quality of the bottle blowing machine of the mineral water blow molding machine include: preform and its heating, pre-blowing (position, excitation and flow), stretching rod, pressure blowing (pressure and excitation position), and molds, etc.

VIEW ALL

It’s the simplest way to know everything.

contact

Our team are on hand 24 hours and 7days per week to answer any questions and inquiry that you may have