23/02/10
Precautions for operation of semi automatic blow molding machine 4cavity products
What should be paid attention to when operating semi automatic blow molding machine 4cavity products? 1. Open the cooling water valve before heating the machine to start production, and observe whether the water channel is unobstructed.
What should be paid attention to when operating semi automatic blow molding machine 4cavity products?
1. Open the cooling water valve before heating the machine to start production, and observe whether the water channel is unobstructed.
2. Turn on the power switch on the side of the control box, turn on the internal power supply, and press the motor start button on the panel to start the oil pump motor.
3. For machines that are used for the first time or that have not been used for a long time, after the oil pump is started, it must be run empty for a few minutes before starting to operate.
4. Turn on the heating switch, connect the electric heating power supply, adjust the temperature control, set the temperature, and observe the current of the ammeter to judge whether the heating coil is good or bad.
5. The test run should be carried out sequentially from manual → semi-automatic → fully automatic. At the same time, check whether the important fastening bolts are loose, and stop immediately if any abnormality is found. After confirming that it is normal or troubleshooting, proceed to the test run.
6. When changing from black material to other light-colored materials, the barrel should be cleaned. The cleaning work should be carried out under the condition of heating the barrel, and a certain amount of cleaning agent should be added. So that the semi automatic blow molding machine 4cavity products are cleaned as soon as possible.
RELEVANT
23/02/10
Precautions for operation of semi automatic blow molding machine 4cavity products
What should be paid attention to when operating semi automatic blow molding machine 4cavity products? 1. Open the cooling water valve before heating the machine to start production, and observe whether the water channel is unobstructed.
VIEW ALL
22/07/29
The future of blow molding machines will be brighter
The sales volume of blow molding machines in recent years has been better than before. At present, my country's blow molding machine manufacturers have developed their own core systems for blow molding machines, while the high-end market is just the opposite. one part.
VIEW ALL
22/07/29
What are the factors affecting the process quality of the mineral water blow molding machine?
The factors that affect the quality of the bottle blowing machine of the mineral water blow molding machine include: preform and its heating, pre-blowing (position, excitation and flow), stretching rod, pressure blowing (pressure and excitation position), and molds, etc.
VIEW ALL
It’s the simplest way to know everything.
contact
Our team are on hand 24 hours and 7days per week to answer any questions and inquiry that you may have
Copyright©2022 Taizhou Huangyan Shengjie Machine co.,Ltd All Rights Reserved