Need to know before the production of PET blow molding machine

Before starting each shift, lubricating oil can be added to each moving part, including manipulator, manipulator guide rail, opening and closing mold guide rail.

The following common sense should be mastered in the safe operation of the blow molding machine:
(1) Before starting each shift, lubricating oil can be added to each moving part, including manipulator, manipulator guide rail, opening and closing mold guide rail.

Wholesale pet blow machine

(2) Arm swing can be added for one (3-4) days. The large and small chains of the heater can be used once a month. Frequently check whether the engine reducer and heater reducer are short of oil. Main bearings can be added every three months.
(3) Check whether the moving parts are firm, whether the screws are loose and fall off, especially under the condition of large impact, whether the belt transmission parts are abnormal.
(4) Check whether the high-pressure air source, low-pressure air source, power supply and water source are normal.
(5) Check the emergency stop switch, safety door switch and protection device, and check whether the switch is normal.
(6) Check whether the heating head enters the embryo and whether the falling part of the embryo is working normally. If the insertion is not in place, an adjustable embryo presser nut can be used.
(7) Check whether the lamp tube is damaged or damaged. Change in time.
(8) Check whether the pneumatic components are leaking and whether the action is sensitive.
(9) Check whether the triplet leaks abnormally, whether it is blocked, and whether the water cup is too full.
(10) When the solenoid valve of the automatic bottle blowing machine is abnormal, it should be cleaned in time.

RELEVANT

23/02/10

Precautions for operation of semi automatic blow molding machine 4cavity products

What should be paid attention to when operating semi automatic blow molding machine 4cavity products? 1. Open the cooling water valve before heating the machine to start production, and observe whether the water channel is unobstructed.

VIEW ALL

22/07/29

The future of blow molding machines will be brighter

The sales volume of blow molding machines in recent years has been better than before. At present, my country's blow molding machine manufacturers have developed their own core systems for blow molding machines, while the high-end market is just the opposite. one part.

VIEW ALL

22/07/29

What are the factors affecting the process quality of the mineral water blow molding machine?

The factors that affect the quality of the bottle blowing machine of the mineral water blow molding machine include: preform and its heating, pre-blowing (position, excitation and flow), stretching rod, pressure blowing (pressure and excitation position), and molds, etc.

VIEW ALL

It’s the simplest way to know everything.

contact

Our team are on hand 24 hours and 7days per week to answer any questions and inquiry that you may have