22/09/23
Common causes of automatic bottle blowing machine leakage
Insufficient pressure of sealing cylinder. If you choose a low -pressure sealing oil cylinder, the low pressure pressure can be kept below 8 kg. Generally, the water bottle is fine.
1. Insufficient pressure of sealing cylinder. If you choose a low -pressure sealing oil cylinder, the low pressure pressure can be kept below 8 kg. Generally, the water bottle is fine. But this also depends on high pressure blowing pressure. If the high pressure blowing pressure is too high, the sealing oil cylinder will be pushed down. If you can reduce the high pressure pressure, you can also blow high pressure pressure into the bottle to try to reduce the high pressure pressure, or if the high pressure pressure pressure is too large, the clamping pressure will be reduced. If it is too small, the mold will be opened, which will also lead to sealing. Leaks and can increase the pressure of automatic clamping mold.
2. Whether the sealing glue is damaged or in a positive sealing position. If it deviates from the sealing position, it will leak.
3. Whether the sealing cylinder or sealing part is damaged. If the sealing part is damaged, it can be directly reflected, and the solenoid valve of the sealing cylinder is opened.
4. Whether the solenoid valve of the sealing oil cylinder leaks or stuck or the exhaust is unstable, which is also the cause of the leakage of the sealing oil cylinder.
RELEVANT
23/02/10
Precautions for operation of semi automatic blow molding machine 4cavity products
What should be paid attention to when operating semi automatic blow molding machine 4cavity products? 1. Open the cooling water valve before heating the machine to start production, and observe whether the water channel is unobstructed.
VIEW ALL
22/07/29
The future of blow molding machines will be brighter
The sales volume of blow molding machines in recent years has been better than before. At present, my country's blow molding machine manufacturers have developed their own core systems for blow molding machines, while the high-end market is just the opposite. one part.
VIEW ALL
22/07/29
What are the factors affecting the process quality of the mineral water blow molding machine?
The factors that affect the quality of the bottle blowing machine of the mineral water blow molding machine include: preform and its heating, pre-blowing (position, excitation and flow), stretching rod, pressure blowing (pressure and excitation position), and molds, etc.
VIEW ALL
It’s the simplest way to know everything.
contact
Our team are on hand 24 hours and 7days per week to answer any questions and inquiry that you may have
Copyright©2022 Taizhou Huangyan Shengjie Machine co.,Ltd All Rights Reserved